|
|
¡¡Water purificatin material MiraCarbon
|
MiraCarbon
Installation of MiraCarbon
|
Installation Plans |
¡¡With carbon fiber, a large water purification effect can be obtained simply by installing the carbon fibers in water.
However, the manner in which this effect appears differs greatly, depending
on site conditions such as the waterarea, water depth, amount of water, water flows, water quality, etc. and
the method of installation and amount ofcarbon fiber installed. In cases where higher cost-effectiveness is required
in water purification, the optimum installation plan is necessary.
|
Classification of Direct Environmental Water Purification Methods
Using Carbon Fiber |
|
Standard Carbon Fiber Installation Methods
(Water Purification/Seaweed Bed Formation) |
¡¡It is important for miracarbon to swing in water. The way of using is
decided by the purpose, the pollution extent,
¡¡and the site situation,Ž¥Ž¥Ž¥etc.
¡¡ 1¡¥HANGING in the water.
¡¡ 2¡¥FIXING in the water.
¡¡ 3¡¥FLOATING in the water.
¡¡ 4¡¥BOTTOM-LAYING in the water.
Purpose |
Method |
Type |
Attachment method |
Water purification
Seaweed bed formation |
HANGING |
Rope |
¡¡¡¡Ž¥Hanging with Rope type U, I
|
Rope-Float |
¡¡¡¡Ž¥Hanging with Rope and Floats |
Raft |
¡¡¡¡Ž¥Hanging with the Raft,
¡¡¡¡¡¡(PVC made, Wood made) |
Floating island |
¡¡¡¡Ž¥Hanging with the¡¡Float-Island,
¡¡¡¡(Foam material made, Wood made) |
FIXING |
Frame |
¡¡¡¡Ž¥Fixing with the steel-Frame in the water |
FLOATING |
Float |
¡¡¡¡Ž¥Floating with floats in the water |
Bottom sediment decomposition |
BOTTOM-LAYING |
Frame |
¡¡¡¡Ž¥Fixing with the steel-Frame in the water |
Pile |
¡¡¡¡Ž¥Fixing with the steel-Piles/weights in the water |
Water purification
Seaweed bed formation
Bottom sediment decomposition |
FIXING & BOTTOM-LAYING |
Frame |
¡¡¡¡Ž¥Fixing with the steel-Frame in the water
¡¡¡¡Ž¥Bottom-Laying in the water |
FLOATING & BOTTOM-LAYING |
Float |
¡¡¡¡Ž¥Floating with floats in the water
¡¡¡¡Ž¥Bottom-Laying in the water |
|
*If only BOTTOM-LAYING is used, water purification is not achieved and
the effect will be small; therefore, a combination of FLOATING + BOTTOM-LAYING
or HANGING + BOTTOM-LAYING is effective.
|
Schematic Diagrams of Installation Methods |
¡ü HANGING Method
¡ü FIXING Method
¡ü FLOATING Method
Amount of Carbon Fiber Installed
¡¡¡¡The amount installed is calculated based on various conditions, including the shape of the water area, water depth, water quality, flow ¡¡velocity, residence time, etc.
Location of installation |
Purpose |
Amount of carbon fiber g/m³ |
Pond, lake/marsh, sea |
Water purification |
£±£°¡Á£±£°£° |
River |
Water purification |
£±£°£°¡Á£²£°£° |
Sewage/factory wastewater |
Water purification |
£²£°£°¡Á£¶£°£° |
Pond, lake/marsh, sea |
Seaweed bed formation |
£±£°¡Á£²£°£° |
|